Thin-Film Surface Tension Mechanics & Inverted Bell Geometries
The Calyx Flower Bloom (commonly known as the Morning Glory or Water Bell nozzle) creates a graceful, inverted floral chalice of crystal-clear water. Operating at ultra-low hydrodynamic pressures, it depends on balance between centrifugal liquid momentum and the water surface tension (( gamma approx 0.0728 ) N/m at 20Β°C).
Water is forced through an adjustable annular conical gap between a brass nozzle body and a contoured mushroom deflective core. As the thin film expands radially into ambient air, surface tension draws the outer edge into a curved parabolic bell before gracefully cascading into the basin with virtually zero audible splashing.
Micrometer Thread Gap Regulation & Flow Modulation
A key technical distinction of Fludio Calyx nozzles is the precision micrometer-threaded adjustment spindle. By rotating the upper deflection cap, hydraulic technicians can modulate the annular gap between 0.5 mm and 3.0 mm.
A narrow gap produces a delicate, paper-thin, expansive sheet ideal for quiet indoor hospital courtyards and executive boardrooms. Opening the gap increases film thickness to 2.5 mm, creating a robust, wind-tolerant bloom suited for covered exterior terraces and hotel porte-cochères.
Acoustic Attenuation & Zero-Splash Indoor Integration
In confined architectural spaces where airborne mist or acoustic echo would damage furnishings or disrupt speech, Calyx nozzles excel. Unlike high-pressure foaming geysers that create significant turbulence, the Calyx bell re-enters the pool at tangential laminar angles, keeping noise levels below 45 dBA.
Fludio engineers recommend pairing Calyx jets with bottom-suction submerged anti-vortex plates and quiet submersible canned-motor pumps to maintain continuous whisper-quiet operation.
Wind Sensitivity & Basin Containment Geometry
Because the water sheet is extremely thin, Calyx bloom fountains are inherently sensitive to crosswinds exceeding 12 km/h (Beaufort Scale 2), which can tear the laminar film into droplets.
For semi-sheltered installations, Fludio recommends keeping the maximum bell diameter below 60% of the basin width, or installing recessed wind-break perimeter planter walls to preserve the pristine geometric shape.
| Model | Inlet Size | Operating Pressure (bar) | Flow Rate (LPM) | Bell Diameter (m) | Recommended Water Level |
|---|---|---|---|---|---|
| FL-CX-05 | 1/2" BSP | 0.2 β 0.5 bar | 10 β 18 LPM | 0.3 β 0.5 m | Water-Level Independent |
| FL-CX-07 | 3/4" BSP | 0.2 β 0.6 bar | 18 β 35 LPM | 0.5 β 0.8 m | Water-Level Independent |
| FL-CX-10 | 1.0" BSP | 0.3 β 0.8 bar | 35 β 65 LPM | 0.8 β 1.2 m | Water-Level Independent |
| FL-CX-15 | 1.5" BSP | 0.4 β 1.0 bar | 65 β 120 LPM | 1.2 β 1.8 m | Water-Level Independent |
| FL-CX-20 | 2.0" BSP | 0.5 β 1.2 bar | 120 β 210 LPM | 1.8 β 2.5 m | Water-Level Independent |